CNC turning
Shafts, pins, bushes and fittings from bar or billet, finished on lathes with live tooling.
Turning at a glance
Live tooling mills flats, cross holes and slots in the same set-up, so the part comes off the lathe finished.
Machines
3 CNC lathes with bar feed
Largest part
Ø 400 × 600 mm
From bar
up to Ø 65 mm
Tolerance held
± 0.01 mm
Figures (sample).
Typical route: shaft, 120 off
Part
SH-402 rev D
Material
EN24T
CNC lathe
Turn complete from Ø 45 mm bar
CNC lathe
Mill keyway and cross hole on live tooling
Bench
Deburr and thread check
Inspection
First article, then 1 in 20
Outside process
Zinc nickel plate
Dispatch
Oil, bag and label
A typical route (sample); every job gets its own card.
Send us a drawing
PDF and STEP files are best. An estimator replies within two working days with a price per part and a lead time (sample).